Saturday, September 29, 2012

Three Most Successful Military Rifles

From left 8 X 57, 303 British and 7.62 X 54 Most Successful Rifle When I am referring to the most successful I mean the most widely distributed military rifle that was used from the late 19’Th century through WW ll. It would be something that was used by several countries over a period of time and perhaps the design was copied by some commercial rifle makers. Of course it will be a good design that withstood the test of time. I have three that could qualify. There are other good military rifles but they didn’t enjoy as wide a use as these three.
303 British Military Rifle The first candidate is the outstanding rifles chambered for the 303 British Round. The rifle came out in 1887 and adopted in 1888. It was invented by James Paris Lee an American, incidentally. Originally loaded with black powder they switched to smokeless and a pointed bullet using Cordite powder. The one used the most was a 174 grain flat base bullet at about 2400 FPS. Cordite powder was used for many years in the 303 as well as British sporting arms. The rifle saw use in both WWl and WWll not to mention many other smaller wars and skirmishes. It is popular in many of the former British colonies including Canada and Australia. As a military rifle it had few peers and some folks feel that it is the best pure military rifle of the period. It was powerful enough for the job at hand and reliable. It cocks on closing which is liked by some because it would help a little in getting a stubborn round out of the chamber. It also was capable of rapid fire for a bolt action a desirable feature during war time. It has provisions for escaping gas in the unlikely event of a case rupture. Many of them have oversize chambers which was done on purpose to be able to chamber and fire dirty or deformed ammo. That causes case separation especially when handloading so look out for bulges in your chamber when examining fired cases. To counteract that problem set your sizing die to just enough sizing to where it will fit in the chamber. Accuracy can be outstanding in one that is in good shape. They have a two piece stock which is disliked by some. Another plus is that they are readily available and fairly inexpensive unless it an odd model. The MK 4 which was brought out in the 1930’s was a stronger and simpler version of the older models. The fact that it was used by the Brits for 70 years would indicate that it is a strong and reliable rifle. Since they were used until 1957 there are a lot of variations out there. The ammo for it is still relatively available and brass is sold at various locations. The bullet is a 311 diameter which can be found easily. Since it is a rimmed cartridge it might turn off some folks but it functioned with great reliability in the weapons it was designed for. The magazine protrudes below the stock which might make it more difficult for a hunter to carry though the balance is forward of magazine. The 303 round loaded with a good hunting bullet is capable of taking most big game animals out there. Some folks compare it to the 30-40 Krag but due to higher loading pressures it will out do its American competitor. The Krag was commonly loaded to 40,000 PSI while The 303 rifles were designed for pressures of 45 to 48,000 PSI though some of the newer ones were chambered for the 308 which can go to 62,000 PSI which would suggest that it was a strong rifle. At one time it was chambered in a few sporting a rifle such as the Winchester model 95 but that is no longer true. No one to my knowledge makes a clone of the Lee Enfield rifle today. It can be sporterized to an extent but it might not be worth the dollars required to make that happen. That is something that the owner would have to determine. You can mount a scope with a side mount which will enhance it accuracy and with a good barrel it may very well be worth the bucks. Adding a sporter stock would enhance it looks if that’s important to you.
Russian Nagant Carbine Another widely distributed rifle was the Russian Nagant. It was adopted in 1891 using a round nose bullet however in 1909 a 150 grain spitzer was employed. At about 2800 FPS it is in the same class as the 30-06. Like the 303 it was adopted and used in many of the satellite countries controlled by the Soviet Union. Like many things Russian it was plain and rugged and gave good service. Many of the actions looked crude though they were reliable. The ones made by Remington and Westinghouse were better looking and finished. There are no provisions to route gas away from a shooter in the event of a case rupture which can be a problem with old ammo. In all honesty that event is very unlikely with good ammo. However during the 1920’s some Russians were rechambered for the 30-06 cartridge to make them easier to sell. The problem with that was the barrels were not set back which meant that it was extremely dangerous to fire it in the Russian because the base wasn’t supported. If by a small chance you have one don’t even think of shooting it as the results will be catastrophic. The safety is difficult to use though it works. In fact the 7.62 X 54 cartridge is still being used in some sniper rifles and machine guns making it the most long lived military cartridge still in use for the last 119 years. If you buy one and want the best accuracy then you need to slug the bore. They run from 308 to about 316 so a bullet that matches the bore will produce the best accuracy. With the properly matched bullet accuracy can be very good. When handloading ammo keep in mind that they are designed for 45,000 PSI and if you have an older one keep that in mind. Factory and military ammo are fairly easy to find and are commonly loaded with a 310 diameter bullet. Cases are available as are 308 & 311 diameter slugs. It is a flexible cartridge capable of handling cast bullets and reduced loads. If you need a larger slug then you might have to get creative or use an oversized cast bullet. With good ammo it is capable of most hunting situations that most people will encounter. They come in many models from various countries so there are differences in them. One odd feature is the firing pin can be adjusted with a supplied tool. I have fired quite a few of them and never saw a need to do so. I have a WWll sniper version but the trigger is lousy, making it hard to get all of the accuracy it’s capable of. Some of the others I own have decent triggers. You might be able to polish the trigger parts to improve it but if you don’t know how best leave it to a gunsmith. There is a no gunsmithing mount for the Mosen Nagant in case you want to scope it which is a desirable feature as you can return it to original. I mounted one on one of my rifles and it took only a few minutes with simple tools. They have a black composite stock for someone who wants a sporter looking rifle. A real desirable feature for this rifle is they are inexpensive, in most models, and commonly available. Many magazines sell them sometimes for less then a C note. Gun shows and many gunshops are a good source for these rifles. If you want to collect low end military rifles this might be a good place to start. Parts are also plentiful.
Mauser Rifle The third candidate is the justly famous model 98 Mauser. It came out in 1898 with a 318 diameter bullet which was changed to 323 in 1904. It was originally adopted by Germany but many other countries used it during both world wars and many other conflicts both large and small. Like the others they were produced in several countries and many variations. They also were produced in several calibers including the 7.65 X 53, 8 X 57, 7 X 57 and the 30-06. All of the common chamberings including the 8 X 57 are capable hunting rounds and components are easy to find. The chambering depended on which country was buying them. There were other less common chamberings that may be encountered. The Mauser action is the most copied in the world because of it’s strength and safety features. Many manufacturers still produce close copies of the 98. Among them are Ruger, Parker Hale and even Remington produced a Mauser clone recently though they dropped it. The old model 70 Winchester and some of the newer ones follow the 98 design. The action is strong and safe and one produced prior to WWll is almost a work of art. The extractor is one of the most desirable features that sportsman seek. Although I have never has a problem with the newer types such as the Remington’s I do like that large extractor. However in an original it prohibits you from loading single shot unless you put the round in the magazine first. A gunsmith can fix that however. The Springfield fixed that problem though it is essentially a Mauser action. In fact the US paid Germany royalties prior to WWl because it was such a close copy. It has two large locking lugs plus a safety lug which sets it apart from the earlier Mauser rifles. Like the other two they are common and inexpensive in many models. For a less common one or a sniper version you will pay a lot more. Since many millions were made and used for decades that would indicate a high degree of reliability. For gunsmithing purposes the Mauser is head and shoulders above the others. You can install a scope easier not to mention the many verities of mounts and other accessories produced for that rifle. Rebarreling it is easier then the other two plus it can be modified into many calibers not practical in the other two. That would include magnums from the 264 through the 458. While possible I wouldn’t recommend full length cartridges such as the 375 H & H because you have to weaken the receiver where the lower lug is. They do make a magnum Mauser action for the long rounds. The Brevex action was made for the larger cartridges and the recent Remington was made in the 375 H & H magnum. The magazine can be shortened for such offerings as the 243 and 257 Roberts. There is a rimmed version called the Siamese which will handle large rimmed cases such as the 45-70. However they are not as common and I for one would not modify one in original condition.
2.5 PU scope on Nagant So which one is the best: Much of that would depend on who is shooting it. All three have many desirable features and if you leave them original there is not one that is better then the other. If you sporterize then the Mauser is the easiest way to go though you can spiff up the others. There are other rifles not listed that are as good as the three in some respects but they weren’t as widely distributed. The French, Japanese, and the Dutch, Italians and Greeks among others had good rifles that may be preferable to some individuals. I have shot them all and there isn’t one that I dislike though there may be some undesirable features found on all of them. At a later date I will go into them.
303 British loaded with Cordite powder

3 comments:

  1. Your idea is new. There are many people like you who have got similar thinking so I agree with you.

    ReplyDelete

To the Board of Directors,

Gentlemen I`am writing to present you with an idea that i think you may possibly find advantageous to your company. As i`am sure you are aware there is a great interest in whats called "Cowboy Action" shooting in this country and more and more guns of yesteryear are being resurected by the companies that make reproduction firearms.
The sport is growing constantly and the gun makers are constantly looking for ways to take even more advantage of this ever growing market. Guns like the Henry rifle,Spencer carbine, Colt and Remington conversion revolvers and the Colt 1872 Open Top and others are on the market and doudtless other guns of history will be made in the future.
The arms makers try to be as authenic as possible in their copies but one thing keeps them from being "true" copies.The majority of these guns are being made in calibers that the original guns were never made in.The Henry, Spencer,the majority of early Colts were made in rimfire calibers. Ammunition that has`nt been made by American companies since the 1920`s and early 30`s.But with the resurgence in interest in the old guns of our history and boost in ammo sales that go along with it i think it is time to resurect the original ammo these guns used as well. I ask you to think about it and concider this.
The new guns are generally offered in 2 and sometimes 3 caliber options, none of which were ever used in the originals to begin with. If the original rimfire calibers were offered as an addtional caliber option and the ammo for those calibers were available i believe both the guns and ammo sales would skyrocket.
Authenticity is what it is all about with the cowboy action crowd and the collectors and other shooters of these guns.What could be more "authenic" that having a repro in it`s original
chambering rather than a caliber that never was used in the original? Not to mention the fact that if ammo were available once again people that own originals like myself would love to be able to shoot them as well.
i believe that if arrangements could be reached between the gun makers and your company in that they would make the guns with their original calibers as options and you in turn make the ammo available i think it would be a boost in sales for both. I ask both of you to do this.
The gun makers offer the guns in their original calibers as a limited trial. You in turn make a limited run of the ammo. you both market the availablity of guns and ammo and see how it works. I believe you will find a gold mine has been discovered.
About 20 yrs ago i wrote a letter to your company asking that you concider making various rimfire ammo available again for people like myself who own antiques and would love to shoot them if ammo were available.My letter made it into the hands of someone { can`t recall who}
but he was a higher up in the company at the time.
He wrote me back saying he personally thought i had a good idea and he had presented my idea before the board and they turned it down saying they did`nt believe there was enouht of a market out there
Well things have changed quite a lot since then and i think that my idea might be worth concideration once again. I hope you agree as well.

Sincerely,
Robert Heins